This Product Can Be Used to Spray Paint, Coatings, Formaldehyde Treatment, Family Guardrails, Floors, Furniture, Walls, Vehicles, and Other Surfaces. It is equipped with an atomization adjustment mode to form a fine spray so that the sprayed materials will not have bubbles, and you will save time and energy by covering the spraying area in all directions! We provide you with three different sizes of nozzles (2.5mm, 1.8mm, 1mm) so that you can choose according to your spraying needs such as furniture, cars, fences, interior walls, garage doors, garden tables and chairs. Each nozzle has three spraying shapes: horizontal, vertical, and dot, which makes it easy to spray horizontal and vertical object surfaces, even edges and corners, bringing you convenience.You can adjust the spraying width (20-30cm/7.87-11.81in) and flow 100-200mL/min by adjusting the knob on the machi. It uses a lithium battery power supply, so you won't be bound by wires, and you can spray freely even without a socket around! The top of the paint sprayer is designed with an unlock button, which allows you to quickly disassemble the machine and provides convenience for you. We provide you with a test funnel so that you can test the viscosity of the paint before use so that you can carry out the spraying work more smoothly. Material: ABS Shell, Copper Core Nozzle, Plastic Spray Jug.
100-200 ml/min (0.026-0.052Gal/ min). 2.5mm/ 0.0984in, 1.8mm/ 0.0709in, 1mm/ 0.0394in.
Overall Length of the Product: 29.8cm/ 11.73in. Overall Height of the Product: 28cm/ 11.02in.Package Size: 261720cm/ 10.246.697.87in. Net Weight: 1.6kg/ 3.53lbs. Please note that it is not recommended to spray emulsion paint on this product, because the effect of spraying will be poor if the dilution is not up to the standard. After receiving the machine, use clean water to test the power and atomization effect of the machine. But please do not test directly with paint or paint. Please adjust the viscosity of the coating before spraying, which is generally applicable to the coating that can flow through the funnel within 20-40s. The spray gun shall be sprayed at a uniform speed. It is recommended to keep the spraying distance about 30cm. When the spray gun is spraying upward, please do not loosen the trigger, or the paint will flow back into the motor, causing damage to the machine. Please do not spray the machine vertically upwards. It is recommended to spray the top at an angle of 45 °. Please clean the spray gun and spray pot in time after use to prevent the nozzle from being blocked due to dry paint.
Cleaning Method: put clean water into the watering can and spray it for about 30-60s. Be sure to thoroughly spray the residual dirt in the valve core until clean water is sprayed.Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.
Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Paint Sprayers & Accessories\Paint Sprayers". The seller is "wercham-32" and is located in this country: US.This item can be shipped to United States.